ट्यूटोरियल लोचदार - टीएलएस एन्क्रिप्शन और एचटीटीपीएस को सक्षम करें

क्या आप लोचदार टीएलएस एन्क्रिप्शन और एचटीटीपीएस संचार को सक्षम करने का तरीका सीखना चाहेंगे? इस ट्यूटोरियल में, हम आपको दिखाने जा रहे हैं कि सुरक्षा सुविधा को कैसे सक्षम किया जा सकता है और कैसे एक कंप्यूटर पर लोचदार खोज सर्वर पर एचटीटीपीएस एन्क्रिप्शन को सक्षम करने के लिए Ubuntu लिनक्स चल रहा है।

• उबंटू 18
• उबंटू 19
• लोचदार खोज 7.6.2
• किबाना 7.6.2

हमारे उदाहरण में, एलेस्टिसर्च सर्वर आईपी पता 192.168.100.7 है।

लोचदार खोज संबंधित ट्यूटोरियल:

इस पृष्ठ पर, हम लोचदार खोज स्थापना से संबंधित ट्यूटोरियल की एक सूची तक त्वरित पहुंच प्रदान करते हैं।

ट्यूटोरियल लोचदार – बेसिक लाइसेंस को अपग्रेड करना

आवश्यक पैकेज स्थापित करें।

Copy to Clipboard

लोचदार सर्च सर्वर पर स्थापित लाइसेंस प्रकार का सत्यापन करें।

Copy to Clipboard

यहां कमांड आउटपुट है।

Copy to Clipboard

हमारे उदाहरण में, हमारे पास लोचदार खोज सर्वर पर एक बुनियादी लाइसेंस स्थापित है।

इलास्टिकसर्च सर्वर पर ट्रायल लाइसेंस को सक्षम बनासकते हैं।

Copy to Clipboard

सुरक्षा सुविधाएं इलास्टिकसर्च बेसिक लाइसेंस पर उपलब्ध नहीं हैं।

ट्यूटोरियल लोचदार – टीएलएस एन्क्रिप्शन और HTTPS संचार सक्षम

लोचदार खोज सेवा बंद करो।

Copy to Clipboard

सेल्फ साइन सर्टिफिकेट अथॉरिटी बनाएं।

Copy to Clipboard

यहां कमांड आउटपुट है।

Copy to Clipboard

हमारे उदाहरण में, कोई पासवर्ड सेट नहीं किया गया था।

इलास्टिकसर्च नोड के लिए एक प्रमाण पत्र बनाएं।

Copy to Clipboard

यहां कमांड आउटपुट है।

Copy to Clipboard

This tool assists you in the generation of X.509 certificates and certificate
signing requests for use with SSL/TLS in the Elastic stack.

The 'cert' mode generates X.509 certificate and private keys.
    * By default, this generates a single certificate and key for use
       on a single instance.
    * The '-multiple' option will prompt you to enter details for multiple
       instances and will generate a certificate and key for each one
    * The '-in' option allows for the certificate generation to be automated by describing
       the details of each instance in a YAML file

* An instance is any piece of the Elastic Stack that requires an SSL certificate.
      Depending on your configuration, Elasticsearch, Logstash, Kibana, and Beats
      may all require a certificate and private key.
    * The minimum required value for each instance is a name. This can simply be the
      hostname, which will be used as the Common Name of the certificate. A full
      distinguished name may also be used.
    * A filename value may be required for each instance. This is necessary when the
      name would result in an invalid file or directory name. The name provided here
      is used as the directory name (within the zip) and the prefix for the key and
      certificate files. The filename is required if you are prompted and the name
      is not displayed in the prompt.
    * IP addresses and DNS names are optional. Multiple values can be specified as a
      comma separated string. If no IP addresses or DNS names are provided, you may
      disable hostname verification in your SSL configuration.

* All certificates generated by this tool will be signed by a certificate authority (CA).
    * The tool can automatically generate a new CA for you, or you can provide your own with the
         -ca or -ca-cert command line options.

By default the 'cert' mode produces a single PKCS#12 output file which holds:
    * The instance certificate
    * The private key for the instance certificate
    * The CA certificate

If you specify any of the following options:
    * -pem (PEM formatted output)
    * -keep-ca-key (retain generated CA key)
    * -multiple (generate multiple certificates)
    * -in (generate certificates from an input file)
then the output will be be a zip file containing individual certificate/key files

Enter password for CA (elastic-stack-ca.p12) :
Please enter the desired output file [elastic-certificates.p12]:
Enter password for elastic-certificates.p12 :

Certificates written to /usr/share/elasticsearch/elastic-certificates.p12

This file should be properly secured as it contains the private key for
your instance.

This file is a self contained file and can be copied and used 'as is'
For each Elastic product that you wish to configure, you should copy
this '.p12' file to the relevant configuration directory
and then follow the SSL configuration instructions in the product guide.

For client applications, you may only need to copy the CA certificate and
configure the client to trust this certificate.

हमारे उदाहरण में, कोई पासवर्ड सेट नहीं किया गया था।

प्रमाण पत्रों को उचित निर्देशिका में कॉपी करें और सही अनुमतियां निर्धारित करें।

Copy to Clipboard

एचटीटीपीएस संचार को सक्षम करने के लिए एक प्रमाण पत्र बनाएं।

Copy to Clipboard

यहां कमांड आउटपुट है।

Copy to Clipboard

## Elasticsearch HTTP Certificate Utility

The 'http' command guides you through the process of generating certificates
for use on the HTTP (Rest) interface for Elasticsearch.

This tool will ask you a number of questions in order to generate the right
set of files for your needs.

## Do you wish to generate a Certificate Signing Request (CSR)?

A CSR is used when you want your certificate to be created by an existing
Certificate Authority (CA) that you do not control (that is, you don't have
access to the keys for that CA).

If you are in a corporate environment with a central security team, then you
may have an existing Corporate CA that can generate your certificate for you.
Infrastructure within your organisation may already be configured to trust this
CA, so it may be easier for clients to connect to Elasticsearch if you use a
CSR and send that request to the team that controls your CA.

If you choose not to generate a CSR, this tool will generate a new certificate
for you. That certificate will be signed by a CA under your control. This is a
quick and easy way to secure your cluster with TLS, but you will need to
configure all your clients to trust that custom CA.

Generate a CSR? [y/N]^C^Croot@elasticsearch:/etc/elasticsearch# ^C
root@elasticsearch:/etc/elasticsearch# vi /usr/share/elasticsearch/bin/elasticsearch-certutil
root@elasticsearch:/etc/elasticsearch# /usr/share/elasticsearch/bin/elasticsearch-certutil  http

## Elasticsearch HTTP Certificate Utility

The 'http' command guides you through the process of generating certificates
for use on the HTTP (Rest) interface for Elasticsearch.

This tool will ask you a number of questions in order to generate the right
set of files for your needs.

## Do you wish to generate a Certificate Signing Request (CSR)?

A CSR is used when you want your certificate to be created by an existing
Certificate Authority (CA) that you do not control (that is, you don't have
access to the keys for that CA).

If you are in a corporate environment with a central security team, then you
may have an existing Corporate CA that can generate your certificate for you.
Infrastructure within your organisation may already be configured to trust this
CA, so it may be easier for clients to connect to Elasticsearch if you use a
CSR and send that request to the team that controls your CA.

If you choose not to generate a CSR, this tool will generate a new certificate
for you. That certificate will be signed by a CA under your control. This is a
quick and easy way to secure your cluster with TLS, but you will need to
configure all your clients to trust that custom CA.

Generate a CSR? [y/N]

## Do you have an existing Certificate Authority (CA) key-pair that you wish to use to sign your certificate?

If you have an existing CA certificate and key, then you can use that CA to
sign your new http certificate. This allows you to use the same CA across
multiple Elasticsearch clusters which can make it easier to configure clients,
and may be easier for you to manage.

If you do not have an existing CA, one will be generated for you.

Use an existing CA? [y/N]y

## What is the path to your CA?

Please enter the full pathname to the Certificate Authority that you wish to
use for signing your new http certificate. This can be in PKCS#12 (.p12), JKS
(.jks) or PEM (.crt, .key, .pem) format.
CA Path: /usr/share/elasticsearch/elastic-stack-ca.p12
Reading a PKCS12 keystore requires a password.
It is possible for the keystore's password to be blank,
in which case you can simply press <ENTER> at the prompt
Password for elastic-stack-ca.p12:

## How long should your certificates be valid?

Every certificate has an expiry date. When the expiry date is reached clients
will stop trusting your certificate and TLS connections will fail.

Best practice suggests that you should either:
(a) set this to a short duration (90 - 120 days) and have automatic processes
to generate a new certificate before the old one expires, or
(b) set it to a longer duration (3 - 5 years) and then perform a manual update
a few months before it expires.

You may enter the validity period in years (e.g. 3Y), months (e.g. 18M), or days (e.g. 90D)

For how long should your certificate be valid? [5y]

## Do you wish to generate one certificate per node?

If you have multiple nodes in your cluster, then you may choose to generate a
separate certificate for each of these nodes. Each certificate will have its
own private key, and will be issued for a specific hostname or IP address.

Alternatively, you may wish to generate a single certificate that is valid
across all the hostnames or addresses in your cluster.

If all of your nodes will be accessed through a single domain
(e.g. node01.es.example.com, node02.es.example.com, etc) then you may find it
simpler to generate one certificate with a wildcard hostname (*.es.example.com)
and use that across all of your nodes.

However, if you do not have a common domain name, and you expect to add
additional nodes to your cluster in the future, then you should generate a
certificate per node so that you can more easily generate new certificates when
you provision new nodes.

Generate a certificate per node? [y/N]

## Which hostnames will be used to connect to your nodes?

These hostnames will be added as "DNS" names in the "Subject Alternative Name"
(SAN) field in your certificate.

You should list every hostname and variant that people will use to connect to
your cluster over http.
Do not list IP addresses here, you will be asked to enter them later.

If you wish to use a wildcard certificate (for example *.es.example.com) you
can enter that here.

Enter all the hostnames that you need, one per line.
When you are done, press <ENTER> once more to move on to the next step.

You did not enter any hostnames.
Clients are likely to encounter TLS hostname verification errors if they
connect to your cluster using a DNS name.

Is this correct [Y/n]

## Which IP addresses will be used to connect to your nodes?

If your clients will ever connect to your nodes by numeric IP address, then you
can list these as valid IP "Subject Alternative Name" (SAN) fields in your
certificate.

If you do not have fixed IP addresses, or not wish to support direct IP access
to your cluster then you can just press <ENTER> to skip this step.

Enter all the IP addresses that you need, one per line.
When you are done, press <ENTER> once more to move on to the next step.

You did not enter any IP addresses.

Is this correct [Y/n]

## Other certificate options

The generated certificate will have the following additional configuration
values. These values have been selected based on a combination of the
information you have provided above and secure defaults. You should not need to
change these values unless you have specific requirements.

Key Name: elasticsearch
Subject DN: CN=elasticsearch
Key Size: 2048

Do you wish to change any of these options? [y/N]

## What password do you want for your private key(s)?

Your private key(s) will be stored in a PKCS#12 keystore file named "http.p12".
This type of keystore is always password protected, but it is possible to use a
blank password.

If you wish to use a blank password, simply press <enter> at the prompt below.
Provide a password for the "http.p12" file:  [<ENTER> for none]

## Where should we save the generated files?

A number of files will be generated including your private key(s),
public certificate(s), and sample configuration options for Elastic Stack products.

These files will be included in a single zip archive.

What filename should be used for the output zip file? [/usr/share/elasticsearch/elasticsearch-ssl-http.zip]

Zip file written to /usr/share/elasticsearch/elasticsearch-ssl-http.zip

हमारे उदाहरण में, कोई पासवर्ड, कोई डीएनएस, और कोई आईपी पते सेट नहीं किए गए थे।

हमारे उदाहरण में, हमने पहले बनाए गए स्व-हस्ताक्षरित प्रमाण पत्र प्राधिकरण का उपयोग किया।

प्रमाण पत्रों को उचित निर्देशिका में कॉपी करें और सही अनुमतियां निर्धारित करें।

Copy to Clipboard

लोचदार खोज विन्यास फ़ाइल को संपादित करें: लोचदार खोज.yml

Copy to Clipboard

फ़ाइल के अंत में निम्नलिखित पंक्तियां जोड़ें।

Copy to Clipboard

यहां मूल फ़ाइल है, हमारे विन्यास से पहले ।

Copy to Clipboard

यहां हमारे विन्यास के साथ फ़ाइल है ।

Copy to Clipboard

लोचदार खोज सेवा शुरू करें।

Copy to Clipboard

लोचदार सर्च बिल्ट-इन यूजर्स के लिए पासवर्ड सेट करें।

Copy to Clipboard

यहां कमांड आउटपुट है।

Copy to Clipboard

लोचदार खोज सर्वर के साथ अपने संचार का परीक्षण करें।

ध्यान रखें कि हमें HTTPS का उपयोग करने की आवश्यकता है।

ध्यान रखें कि हम फर्जी प्रमाण पत्रों का उपयोग कर रहे हैं, इसलिए हमें कर्ल कमांड पर प्रमाण पत्र सत्यापन को अक्षम करने की आवश्यकता है।

Copy to Clipboard

यहां कमांड आउटपुट है।

Copy to Clipboard

इलास्टिकसर्च सर्वर को उपयोगकर्ता प्रमाणीकरण की आवश्यकता है।

लोचदार उपयोगकर्ता खाते का उपयोग करके लोचदार खोज सर्वर के साथ अपने संचार का परीक्षण करें।

Copy to Clipboard

यहां कमांड आउटपुट है।

Copy to Clipboard

आप कमांड-लाइन पर उपयोगकर्ता पासवर्ड दर्ज करना चुन सकते हैं।

Copy to Clipboard

बधाइयाँ! आपने इलास्टिकसर्च टीएलएस एन्क्रिप्शन कॉन्फ़िगरेशन खत्म कर दिया है।

बधाइयाँ! आपने इलास्टिकसर्च एचटीटीपीएस कॉन्फ़िगरेशन खत्म कर दिया है।

ट्यूटोरियल लोचदार खोज – किबाना विन्यास

किबाना सेवा बंद करो।

Copy to Clipboard

स्व-हस्ताक्षरित प्रमाणन प्राधिकरण प्रमाण पत्र की प्रतिलिपि करें।

Copy to Clipboard

किबाना विन्यास फ़ाइल का नाम संपादित करें: kibana.yml

Copy to Clipboard

HTTP से HTTPS तक इलास्टिकसर्च कनेक्शन का पता लगाएं और बदलें।

Copy to Clipboard

फ़ाइल के अंत में निम्नलिखित पंक्तियां जोड़ें।

Copy to Clipboard

यहां मूल फ़ाइल है, हमारे विन्यास से पहले ।

Copy to Clipboard

यहां हमारे विन्यास के साथ फ़ाइल है ।

Copy to Clipboard

ध्यान रखें कि आपको अपने पर्यावरण को प्रतिबिंबित करने के लिए किबाना पासवर्ड बदलने की आवश्यकता है।

किबाना सेवा शुरू करें।

Copy to Clipboard

अपना ब्राउज़र खोलें और अपने किबाना सर्वर प्लस:5601 के आईपी पते दर्ज करें।

हमारे उदाहरण में, निम्नलिखित यूआरएल ब्राउज़र में दर्ज किया गया था:

• http://192.168.100.7:5601

किबाना वेब इंटरफेस प्रस्तुत किया जाना चाहिए

एक सफल लॉगिन के बाद, किबाना डैशबोर्ड प्रस्तुत किया जाना चाहिए।

बधाइयाँ! आपने इलास्टिकसर्च के लिए किबाना एकीकरण समाप्त कर दिया है।

लोचदार – टीएलएस एन्क्रिप्शन और HTTPS संचार सक्षम

लोचदार – टीएलएस एन्क्रिप्शन और HTTPS संचार सक्षम

लोचदार खोज संबंधित ट्यूटोरियल:

ट्यूटोरियल लोचदार – बेसिक लाइसेंस को अपग्रेड करना

ट्यूटोरियल लोचदार – टीएलएस एन्क्रिप्शन और HTTPS संचार सक्षम

ट्यूटोरियल लोचदार खोज – किबाना विन्यास

Related Posts