Would you like to learn how to configure the DMZ feature on the TP-LINK ARCHER C20 AC750? In this tutorial, we are going to use NAT to redirect all external ports of the AC750 router to a server located on the internal network.
• TP-LINK ARCHER C20 AC750 - Version 5.0
Equipment list
Here you can find the list of equipment used to create this tutorial.
This link will also show the software list used to create this tutorial.
TPLINK - Related Tutorial:
On this page, we offer quick access to a list of tutorials related to TP-LINK AC750.
Archer C20 AC750 - DMZ configuration
Open your browser and enter the IP address of your wireless router.
In our example, the following URL was entered in the Browser:
• http://192.168.0.1
The AC750 web interface should be presented.
On the login screen, enter the management password.
Access the Advanced tab on the top of the screen.
Access the NAT FORWARDING menu and select the DMZ option.
On the DMZ screen, perform the following configuration:
• DMZ - Enabled.
• DMZ host IP address - Enter the IP address of the internal server.
Click on the Save button.
In our example, we forwarded all traffic from the external IP address of the AC750 router to the internal server using the IP address 192.168.0.200.
In our example, the internal server is an Ubuntu Linux running the Apache service.
Open your browser and enter the external IP address of your wireless router.
In our example, the following URL was entered in the Browser:
• http://200.200.200.200
The internal web server page should be presented.
Congratulations, you have finished the DMZ configuration using NAT on the AC750 router.
