Would you like to learn how to configure the Night mode on the TP-LINK RE650 wireless repeater? In this tutorial, we are going to use the LED control feature to configure the Night mode on the RE650 wireless repeater.

• TP-LINK RE650 – Version 1.0
• TP-Link AC2600 WiFi Extender

Equipment list

The following section presents the list of equipment used to create this tutorial.

As an Amazon Associate, I earn from qualifying purchases.

TPLINK – Related Tutorial:

On this page, we offer quick access to a list of tutorials related to TP-LINK.

TP-LINK RE650 – LED control

Open your browser and enter the IP address of your wireless repeater.

In our example, the following URL was entered in the Browser:

• http://192.168.0.254

The RE650 web interface should be presented.

On the login screen, enter the management password.

TL-WA850R - Login

Access the Advanced tab on the top of the screen.

ARCHER C6 - Advanced menu

Access the SYSTEM TOOLS menu and select the TIME SETTINGS option.

Archer ac1200 NTP Configuration

Make sure your wireless repeater has the correct time before proceeding.

TL-WA850R - Time Configuration

Access the SYSTEM TOOLS menu and select the LED CONTROL option.

Archer C6 AC1200 - LED Control menu

On the LED control screen, perform the following configuration:

• Night mode – Yes.
• LED off time – Select the time interval when the LED should be turned off.

Click on the Save button.

TL-WA850R - LED CONTROL NIGHT MODE

In our example, we configure the RE650 to turn off the LEDs between 9 PM and 9 AM.

Congratulations, you have configured the Night mode using the LED control feature.