Selvstudium i Windows – Gendan standarddomænepolitikken [ Trin for trin ]

Vil du vide, hvordan du gendanner standarddomænepolitikken? I dette selvstudium skal du vise dig, hvordan du gendanner standarddomænepolitikken på en computer, der kører Windows.

• Windows 2012 R2
• Windows 2016
• Windows 2019

Liste over udstyr

I det følgende afsnit vises listen over udstyr, der bruges til at oprette dette selvstudium.

Som En Amazon Associate, tjener jeg fra kvalificerende køb.

Selvstudium i Windows:

På denne side tilbyder vi hurtig adgang til en liste over selvstudier relateret til Windows.

Selvstudium i Windows – Gendan standarddomænepolitikken

Start som administrator en kommandolinje med administratorrettigheder.

Gendan standarddomænepolitikken.

Copy to Clipboard

Her er kommandoen output.

Copy to Clipboard

Microsoft(R) Windows(R) Operating System Default Group Policy Restore Utility v5.1

Copyright (C) Microsoft Corporation. 1981-2003

Description: Recreates the Default Group Policy Objects (GPOs) for a domain

Syntax: DcGPOFix [/ignoreschema] [/Target: Domain | DC | BOTH]

This utility can restore either or both the Default Domain Policy or the
Default Domain Controllers Policy to the state that exists immediately after
domain creation. You must be a domain administrator to perform this operation.

WARNING: YOU WILL LOSE ANY CHANGES YOU HAVE MADE TO THESE GPOs. THIS UTILITY
IS INTENDED ONLY FOR DISASTER RECOVERY PURPOSES.

You are about to restore Default Domain Policy for the following domain:
TECH.LOCAL
Do you want to continue: <Y/N>? Y
WARNING: This operation will replace all 'User Rights Assignments' made in the chosen GPOs. This might cause some server applications to fail. Do you want to continue: <Y/N>? Y
The Default Domain Policy was restored successfully
Note: Only the contents of the Default Domain Policy were restored. Group Policy links to this Group Policy Object were not altered.
By default, the Default Domain Policy is linked to the domain.

Gendan standardpolitikken for domænecontrollere.

Copy to Clipboard

Her er kommandoen output.

Copy to Clipboard

Microsoft(R) Windows(R) Operating System Default Group Policy Restore Utility v5.1

Description: Recreates the Default Group Policy Objects (GPOs) for a domain

Syntax: DcGPOFix [/ignoreschema] [/Target: Domain | DC | BOTH]

This utility can restore either or both the Default Domain Policy or the
Default Domain Controllers Policy to the state that exists immediately after
domain creation. You must be a domain administrator to perform this operation.

WARNING: YOU WILL LOSE ANY CHANGES YOU HAVE MADE TO THESE GPOs. THIS UTILITY
IS INTENDED ONLY FOR DISASTER RECOVERY PURPOSES.

You are about to restore Default Domain Controller Policy for the following domain:
TECH.LOCAL
Do you want to continue: <Y/N>? Y
WARNING: This operation will replace all 'User Rights Assignments' made in the chosen GPOs. This might cause some server applications to fail. Do you want to continue: <Y/N>? Y
The Default Domain Controller Policy was restored successfully
Note: Only the contents of the Default Domain Controller Policy were restored. Group Policy links to this Group Policy Object were not altered.
By default, the Default Domain Controller Policy is linked to the domain controllers OU.

Du kan også gendanne begge politikker på samme tid.

Copy to Clipboard

Tillykke! Du kan gendanne standarddomænepolitikken.

Windows – Gendan standarddomænepolitikken

Windows – Gendan standarddomænepolitikken

Liste over udstyr

Selvstudium i Windows:

Selvstudium i Windows – Gendan standarddomænepolitikken

Related Posts