Would you like to learn how to configure an 802.11ac wireless network on the TP-LINK ARCHER C20 AC750? In this tutorial, we are going to configure an 802.11ac Wireless network on the AC750 router.

• TP-LINK ARCHER C20 AC750 - Version 5.0

Equipment list

Here you can find the list of equipment used to create this tutorial.

This link will also show the software list used to create this tutorial.

Archer C20 AC750 - 802.11ac Wireless network configuration

Open your browser and enter the IP address of your wireless router.

In our example, the following URL was entered in the Browser:

• http://192.168.0.1

The AC750 web interface should be presented.

On the login screen, enter the management password.

ARCHER C20 LOGIN SCREEN

Access the Advanced tab on the top of the screen.

ARCHER C6 - Advanced menu

Access the WIRELESS menu and select the WIRELESS SETTINGS option.

ARCHER C6 - Wireless menu

On the Wireless settings screen, select the 5GHz wireless network.

Archer C20 AC750 80211ac

On the 5GHz Wireless network settings screen, perform the following configuration:

• Enable Wireless Radio - Yes.
• Network name - Enter the desired SSID name.
• Security - Select the desired authentication method.
• Version - WPA2-PSK.
• Encryption - AES.
• Password - Enter the desired wireless password.
• Mode - 802.11ac/n mixed.
• Channel width - Auto.
• Channel - Auto.
• Transmit power - High.

Click on the Save button.

Archer C20 AC750 802-11ac configuration

Make sure that your wireless devices support the 802.11ac standard.

Congratulations, you have configured an 802.11ac wireless network on the AC750 router.