Archer C20 AC750 - Initial configuration
Connect your computer to the Archer AC750 using an ethernet cable.
Connect the port named Internet to a device with internet access.
Configure the following network address on your computer:
• IP - 192.168.0.100
• NETWORK MASK - 255.255.255.0
Turn on the TP-LINK AC750 and wait 1 minute.
Press the reset button located on the back of your equipment for 10 seconds.
On your desktop, open a DOS prompt and try to ping the default IP address of the TP-LINK equipment.
• IP: 192.168.0.1
Open your browser and enter the IP address of your wireless router.
In our example, the following URL was entered in the Browser:
The AC750 web interface should be presented.
Set a management password.
Select the best option for your internet connection.
In our example, we selected the Dynamic IP address.
Click on the Next button.
Enter a Wireless network name and the desired password.
On the summary screen, click on the Save button.
If you need to change the IP address of the device, access the Advanced tab on the top of the screen.
Access the NETWORK menu and select the LAN option.
Enter the desired network configuration and click on the Save button.
If you need to change the Wireless configuration, access the Advanced tab on the top of the screen.
Access the WIRELESS menu and select the WIRELESS SETTINGS option.
Enter the desired wireless configuration and click on the Save button.
This tutorial presented the initial IP configuration process of a TP-Link ARCHER C20 AC750.