Would you like to learn how to enable SNMP on the TP-LINK ARCHER C20 AC750 wireless router? In this tutorial, we are going to show you how to configure the SNMP agent of a TP-LINK ARCHER C20 AC750 access point.
• TP-LINK ARCHER C20 AC750 – Version 5.0
Equipment list
Here you can find the list of equipment used to create this tutorial.
This link will also show the software list used to create this tutorial.
TPLINK – Related Tutorial:
On this page, we offer quick access to a list of tutorials related to TP-LINK AC750.
Archer C20 AC750 – SNMP
Open your browser and enter the IP address of your wireless router.
In our example, the following URL was entered in the Browser:
• http://192.168.0.1
The AC750 web interface should be presented.
On the login screen, enter the management password.
Access the Advanced tab on the top of the screen.
Access the SYSTEM TOOLS menu and select the SNMP option.
On the SNMP screen, perform the following configuration.
• SNMP AGENT – Yes.
• SNMP FOR WAN – Optional.
• READ-ONLY COMMUNITY – Enter an SNMP community name.
• READ-WRITE COMMUNITY – Optionally, enter an SNMP community name.
Click on the Save button.
To test your SNMP configuration, use the following commands on a computer running Ubuntu Linux.
Keep in mind that you need to change the SNMP community name and the IP address.
Here is the command output.
Congratulations, you have finished the SNMP configuration on the AC750 router.
