Would you like to learn how to configure the APC UPS IP address using the LCD display? In this tutorial, we are going to show you how to configure a static IP address using the LCD display of an APC UPS.
Copyright © 2018-2021 by Techexpert.tips.
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means without the prior written permission of the publisher.
Equipment list
Here you can find the list of equipment used to create this tutorial.
This link will also show the software list used to create this tutorial.
APC UPS - Playlist:
On this page, we offer quick access to a list of videos related to the APC UPS.
Don't forget to subscribe to our youtube channel named FKIT.
APC UPS - Related Tutorial:
On this page, we offer quick access to a list of tutorials related to APC UPS.
Tutorial APC UPS - Configure the IP address using the LCD Display
On the APC UPS LCD display, verify the menu type displayed.
Change the menu type from Standard to Advanced.
On the main menu, access the Configuration option.
On the Configuration menu, access the NMC IP Address settings.
Select the manual IP address mode.
Enter the desired IP address.
Enter the desired network mask.
Enter the default gateway IP address.
Wait the APC UPS network management interface reboot.
Congratulations! You Configured a static IP address on an APC UPS using the LCD display.
Tutorial APC UPS - Accessing the Web interface
After finishing the IP address configuration you need to connect a computer to the APC UPS.
On the computer connected to the UPS, you need to:
Open a browser software, enter the IP address of your UPS and access the APC web interface.
On the login screen, use the default username and default password.
• Default Username: apc
• Default Password: apc
After a successful login, you will be sent to the APC UPS Dashboard.
Congratulations! You are able to access the APC UPS web interface.
