Would you like to learn how to reset the APC UPS network configuration to DHCP mode? In this tutorial, we are going to show you how to reset the APC UPS network management card IP address to DHCP using the reset button on the back of the UPS.
Copyright © 2018-2021 by Techexpert.tips.
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means without the prior written permission of the publisher.
Equipment list
Here you can find the list of equipment used to create this tutorial.
This link will also show the software list used to create this tutorial.
APC UPS Playlist:
On this page, we offer quick access to a list of videos related to the APC UPS.
Don't forget to subscribe to our youtube channel named FKIT.
APC UPS - Related Tutorial:
On this page, we offer quick access to a list of tutorials related to APC UPS.
Tutorial APC UPS - Reset to DHCP Mode
Locate the APC network management card on the back of your APC UPS.
Connect the APC UPS to a network that has a DHCP server.
Press the reset button for 20 seconds.
Wait for the network led change to the orange color.
The APC UPS network configuration will be set to use DHCP.
The APC UPS network management card will reset its configuration back to the factory default.
Congratulations! You successfully configured the DHCP mode on the APC UPS.
Tutorial APC UPS - Accessing the APC UPS
To discover the APC UPS IP address, access the APC oficial website.
Download the software named: Network Management Device IP Configuration Wizard.
Install the software on a computer located on the same network as the APC UPS.
Start the Network Management Card Device IP Configuration Utility.
Enter the full IP address range of your network and click on the button to start the search for the UPS.
The system will automatically locate the IP address of your APC UPS.
In our example, the APC UPS IP address detected was 192.168.0.13.
Open a browser software, enter the IP address of your UPS and access the APC web interface.
On the login screen, use the default username and default password.
• Default Username: apc
• Default Password: apc
After a successful login, you will be sent to the APC UPS Dashboard.
Congratulations! You are able to access the APC UPS web interface.
